You have no items in your shopping cart.
Grip-X Stud Adhesive - (5.2kg Bucket) is a high performance acrylic adhesive specifically designed for bonding all brands of plasterboard to both timber and steel frames. It's no slump-smooth consistency is easy to apply while creating high bond strength. Tested for use on LOSP, T2 & CCA treated timbers in accordance with AS2753. Bonding to treated timbers relies on the prerequisite that the timber had not been treated, dried and stored in accordance with the treatment manufacturer's specifications.
- Tested for use on treated timber
- Superior adhesion
- Water based/non-toxic/non-slump
- Comforms to AS2753.1985
- Green code Compliant
- Proudly Australian made
WARNINGS This product is manufactured in accordance with AS2753-1985 and it must be used in conjunction with the nails or screws in accordance with the current Australian Standards. It does not constitute a fixing system of its own. Do not use on timber that is moist, wet, unseasoned or green.
INSTRUCTIONS Ensure surfaces are dry and free of dust or grease. WALLS: Apply stud adhesive to studs on walnut sized dobs every 230mm and 200mm from ends and edges of sheets.
CEILINGS Apply stud adhesive to framing members in walnut sized dobs at 200mm and 400mm intervals from sheet edges. Do not put adhesive on studs at window/door openings or where butt joints occur. Do not place adhesive within 200mm of where nails/screws will be driven or from sheet edges. Press the sheets firmly against the studs within 30 minutes of adhesive application. Fasten plasterboard to studs according to manufacturer’s directions.
SAFETY AND HANDLING Store in a cool place and out of reach of children. Reseal after use. Avoid contact with eyes or skin. Ensure adequate ventilation. Clean up tools with water before adhesive dries.